Brake Linings

We are manufacturer and exporter of friction material for brakes including brake linings, moulded brake linings and non asbestos brake linings.

Non Asbestos Brake Linings (NA- 106)

NA - 106
This is a medium friction free brake lining with excellent overall rating with cost per mile in mind. It is structured with mineral fibres. It is a stable coefficient of friction over a wide range of temperature and speed.

NA-106 is tested regularly in our laboratory on full scale Dynamometer. It is also tested on roads on fully instrumented test vehicles.

Applications of Non Asbestos Brake Linings
Trucks, trailers, General Freight and Long Haul applications.

Technical Data :

• Specific Gravity: -2.0
  Test used as a control check of the consistency of the formulation and manufacturing of brake lining (SAE J380)
• Gogan Hardness: -GC 15 -40
  Method of measuring a lining's compressibility Used as a quality control check of the consistency of formulation and measuring of brake lining (SAE J379a)
• Tensile Strength: 1400 psi
  Method of evaluating physical strength of brake lining (ASTM 0952). Force required to break sample of 1.0 x 1.0 inch.
• Transverse Rupture Strength: -4800 psi
• Compression Strength: -8500 psi
• Shear Strength: -1700 psi
• Classification: ( SAE J661) -FF

Non Asbestos Brass Brake Linings (NA- 107)

NA - 107
NA-107 is a medium friction free brake linings consisting of Brass. Structural integrity of this material is attended through a blend of mineral fibres, acrylic and glass fibre. This material is ideally suited for scam air brake system used in commercial vehicles. This material has excellent heat stability and is gentle on the mating surface. It is consistent in performance over wide range of duly cycles.

NA-107 is tested regularly in our laboratory on full scale Dynamometer. It is also tested on roads on fully instrumented test vehicles.

Applications of Non Asbestos Brake Linings NA 107
Heavy Duty Tractors, Trailers, Trucks and passenger Buses.

Technical Data :

• Specific Gravity: -2.0
  Test used as a control check of the consistency of the formulation and manufacturing of brake lining (SAE J380)
• Gogan Hardness: -GC 15 -30
  Method of measuring a lining's compressibility. Used as a quality control check of the consistency of formulation and measuring of brake lining (SAE J379a)
• Tensile Strength: 1400 psi
  Method of evaluating physical strength of brake lining (ASTM 0952). Force required to break a sample of 1.0 x 1.0 inch.
• Transverse Rupture Strength: -5000 psi
• Compression Strength: -9200 psi
• Shear Strength: -1700 psi
• Classification: ( SAE J661) -FF

Non Asbestos Brake Linings Semi Metallic (NA 307)

NA - 307
NA-307 is premium Semi-Metallic quality. This material has high structural integrity and is fabricated with specialized steel wool. It has very short burnishing in period and has uniform material distribution. This material is designed for severe service at elevated temperature with heavy loads. It has excellent thermal stability with dependable level of friction over a wide range of temperature. It is known for its qualities of smooth progressive braking, long service life, kindness to the drums and allround consistency of performance.

NA-307 is tested regularly in our laboratory on full scale Dynamometer. It is also tested on roads on fully instrumented test vehicles.

Applications of Non Asbestos Brake Linings
· Heavy Duty Trucks
· Off- Highway Vehicles
· Garbage Trucks

Technical Data :

• Gogan hardness: GC 20-35
  Method of measuring a lining's compressibility. Used as a quality control check of the consistency of formulation and measuring of brake lining (SAE J379a)
• Specific Gravity: 2.4
  Test used as a quality control check of the consistency of formulation and manufacturing of brake lining (SAE J380)
• Tensile Strength: 1700 psi
  Method of evaluating physical strength of brake lining (ASTM 952). Force required to break a sample of 1.0 x 1.0 inch.
• Transverse Rupture Strength: -5000 psi
• Compression Strength: -10000 psi
• Shear Strength: --2200 psi
• Classification: ( SAE J661) -FF

Manufacturer and supplier of auto brake blocks and friction lining material.

Brake Blocks (NA- 507)

(NA - 507)
For the Top-of-the-line quality and consistency in stopping power our NA -507 Quality Brake Blocks are the best in the business. They are manufactured by the most advanced process. The structural integrity of this material is attended through the use of a blend of Aramid, Acrylic and Mineral Fibres. It has excellent overall rating.

NA-507 is tested regularly in our laboratory on full scale Dynamometer. It is also tested on roads on fully instrumented test vehicles.

Application of Brake Blocks:
Designed for long haul Vehicle applications on all terrains

Technical Data :

• Specific Gravity: -2.1
  Test used as a control check of the consistency of the formulation and manufacturing of brake lining (SAE J380).
• Gogan Hardness: -GC 20 -35
  Method of measuring a lining's compressibility. Used as a quality control check of the consistency of formulation and measuring of brake lining (SAE J379a).
• Tensile Strength: 1800 psi
  Method of evaluating physical strength of brake lining (ASTM 0952). Force required to break a sample of 1.0 x 1.0 inch.
• Transverse Rupture Strength: -5000 psi
• Compression Strength: -10500 psi
• Shear Strength: -2100 psi
• Classification: ( SAE J661) -FF

Brake Blocks (NA- 3707)

NA 3707
This is a premium quality brake block using transfer film technology.
It will provide shorter stopping distances, longer Lining life. Longer drum life and quieter braking than any other quality in its class. It is recommended for safety conscious and value conscious fleets. This quality is ideally suited for low floor transit buses.

Physical Properties

• Specific Gravity 2.55
• Gogan Hardness 50
• SAE J661 (Chase) GF

Dynamometer Test Parameters

• Axle Rating 29,000 lbs
• Brake Size 16.5" x 8.63"
• AL Factor 30 x 6.5
• Rolling Radius 18.7"

Brake Blocks (NA- 1707)

NA 1707
This quality is specifically designed for difficult, heavy duty application. This quality gives fade free stopping, longer Lining life and noise free operation. It has low swell and growth, which is ideally suited for automatic slack adjusters.

Applications-Transit/Coach/School Busses, Refuse/Waste disposal vans. Fire/rescue/emergency trucks.

Physical Properties

• Specific Gravity 2.23
• Gogan Hardness 32
• SAE J661 (Chase) FF

Dynamometer Test Parameters

• Axle Rating 23,000 lbs
• Brake Size 16.5" x 7.00"
• AL Factor 30 x 5.5
• Rolling Radius 20.5"